Datasheet

REV. E
AD711
–3–
ABSOLUTE MAXIMUM RATINGS
1
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18 V
Internal Power Dissipation
2
. . . . . . . . . . . . . . . . . . . . . 500 mW
Input Voltage
3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18 V
Output Short Circuit Duration . . . . . . . . . . . . . . . . . Indefinite
Differential Input Voltage . . . . . . . . . . . . . . . . . . +V
S
and –V
S
Storage Temperature Range (Q, H) . . . . . . . –65∞C to +150∞C
Storage Temperature Range (N) . . . . . . . . . . –65∞C to +125∞C
Operating Temperature Range
AD711J/K . . . . . . . . . . . . . . . . . . . . . . . . . . . 0∞C to +70∞C
AD711A/B/C . . . . . . . . . . . . . . . . . . . . . . . . –40∞C to +85∞C
AD711S/T . . . . . . . . . . . . . . . . . . . . . . . . . –55∞C to +125∞C
Lead Temperature Range (Soldering 60 sec) . . . . . . . . . 300∞C
NOTES
1
Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in
the operational section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
2
Thermal Characteristics:
8-Pin Plastic Package: q
JC
= 33∞C/Watt; q
JA
= 100∞C/Watt
8-Pin Cerdip Package: q
JC
= 22∞C/Watt; q
JA
= 110∞C/Watt
8-Pin Metal Can Package: q
JC
= 65∞C/Watt; q
JA
= 150∞C/Watt
8-Pin SOIC Package: q
JC
= 43∞C/Watt; q
JA
= 160∞C/Watt
3
For supply voltages less than ±18 V, the absolute maximum input voltage is equal
to the supply voltage.
ORDERING GUIDE
Temperature Package Package
Model Range Description Option*
*AD711AH –40∞C to +85∞C 8-Pin Metal Can H-08A
AD711AQ –40∞C to +85∞C 8-Pin Ceramic DIP Q-8
*AD711BQ –40∞C to +85∞C 8-Pin Ceramic DIP Q-8
*AD711CH –40∞C to +85∞C 8-Pin Metal Can H-08A
AD711JN 0∞C to 70∞C 8-Pin Plastic DIP N-8
AD711JR 0∞C to 70∞C 8-Pin Plastic SOIC RN-8
AD711JR-REEL 0∞C to 70∞C 8-Pin Plastic SOIC RN-8
AD711JR-REEL7 0∞C to 70∞C 8-Pin Plastic SOIC RN-8
AD711KN 0∞C to 70∞C 8-Pin Plastic DIP N-8
AD711KR 0∞C to 70∞C 8-Pin Plastic SOIC RN-8
AD711KR-REEL 0∞C to 70∞C 8-Pin Plastic SOIC RN-8
AD711KR-REEL7 0∞C to 70∞C 8-Pin Plastic SOIC RN-8
*AD711SQ/883B –55∞C to +125∞C 8-Pin Ceramic DIP Q-8
*AD711TQ/883B –55∞C to +125∞C 8-Pin Ceramic DIP Q-8
*Not for new design, obsolete April 2002
WARNING!
ESD SENSITIVE DEVICE
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the AD711 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.