Datasheet

AD711
REV. A
–3–
ABSOLUTE MAXIMUM RATINGS
1
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18 V
Internal Power Dissipation
2
. . . . . . . . . . . . . . . . . . . . .500 mW
Input Voltage
3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18 V
Output Short Circuit Duration . . . . . . . . . . . . . . . . . Indefinite
Differential Input Voltage . . . . . . . . . . . . . . . . . . +V
S
and –V
S
Storage Temperature Range (Q, H) . . . . . . . .–65°C to +150°C
Storage Temperature Range (N) . . . . . . . . . .–65°C to +125°C
Operating Temperature Range
AD711J/K . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
AD711A/B/C . . . . . . . . . . . . . . . . . . . . . . . .–40°C to +85°C
AD711S/T . . . . . . . . . . . . . . . . . . . . . . . . .–55°C to +125°C
Lead Temperature Range (Soldering 60 sec) . . . . . . . . +300°C
NOTES
1
Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in the
operational section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
2
Thermal Characteristics:
8-Pin Plastic Package: θ
JC
= 33°C/Watt; θ
JA
= 100°C/Watt
8-Pin Cerdip Package: θ
JC
= 22°C/Watt; θ
JA
= 110°C/Watt
8-Pin Metal Can Package: θ
JC
= 65°C/Watt; θ
JA
= 150°C/Watt
3
For supply voltages less than ±18 V, the absolute maximum input voltage is equal
to the supply voltage.
ORDERING GUIDE
Temperature Package Package
Model Range Description Option*
AD711AH –40°C to +85°C 8-Pin Metal Can H-08A
AD711AQ –40°C to +85°C 8-Pin Ceramic DIP Q-8
AD711BH –40°C to +85°C 8-Pin Metal Can H-08A
AD711BQ –40°C to +85°C 8-Pin Ceramic DIP Q-8
AD711CH –40°C to +85°C 8-Pin Metal Can H-08A
AD711CQ –40°C to +85°C 8-Pin Ceramic DIP Q-8
AD711JN 0°C to +70°C 8-Pin Plastic DIP N-8
AD711JR 0°C to +70°C 8-Pin Plastic SOIC R-8
AD711JR-REEL 0°C to +70°C 8-Pin Plastic SOIC R-8
AD711JR-REEL7 0°C to +70°C 8-Pin Plastic SOIC R-8
AD711KN 0°C to +70°C 8-Pin Plastic DIP N-8
AD711KR 0°C to +70°C 8-Pin Plastic SOIC R-8
AD711KR-REEL 0°C to +70°C 8-Pin Plastic SOIC R-8
AD711KR-REEL7 0°C to +70°C 8-Pin Plastic SOIC R-8
AD711SCHIPS –55°C to +125°C Bare Die
AD711SQ/883B –55°C to +125°C 8-Pin Ceramic DIP Q-8
AD711TQ/883B –55°C to +125°C 8-Pin Ceramic DIP Q-8
METALLIZATION PHOTOGRAPH
Dimensions shown in inches and (mm)
Contact factory for latest dimensions.