Datasheet

AD626
–4–
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily ac cu mu late
on the human body and test equipment and can discharge without detection. Although the AD626 features
proprietary ESD pro tec tion circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD pre cau tions are rec om mend ed to avoid per for mance
deg ra da tion or loss of functionality.
ABSOLUTE MAXIMUM RATINGS
1
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +36 V
Internal Power Dissipation
2
Peak Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +60 V
Maximum Reversed Supply Voltage Limit . . . . . . . . . . . . . –34 V
Output Short Circuit Duration . . . . . . . . . . . . . . . . . . Indefi nite
Storage Temperature Range (N, R) . . . . . . . . . –65°C to +125°C
Operating Temperature Range
AD626A/AD626B . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Lead Temperature Range (Soldering 60 sec) . . . . . . . . . +300°C
METALLIZATION PHOTOGRAPH
Dimensions shown in inches and (mm).
NOTES
1
Stresses above those listed under Absolute Max i mum Ratings may cause per ma nent
damage to the device. This is a stress rating only; functional operation of the device
at these or any other conditions above those indicated in the operational section of
this specifi cation is not implied. Exposure to ab so lute maximum rating con di tions
for extended periods may affect device re li abil i ty.
2
8-Lead Plastic Package: ␪
JA
= 100°C/W; ␪
JC
= 50°C/W.
8-Lead SOIC Package: ␪
JA
= 155°C/W; ␪
JC
= 40°C/W.
ORDERING GUIDE
Temperature Package Package
Model Range Description Option
AD626AN –40°C to +85°C Plastic DIP N-8
AD626AR –40°C to +85°C Small Outline IC R-8
AD626BN –40°C to +85°C Plastic DIP N-8
AD626AR-REEL –40°C to +85°C 13" Tape and Reel
AD626AR-REEL7 –40°C to +85°C 7" Tape and Reel
REV. D