Datasheet

AD5764R Data Sheet
Rev. D | Page 20 of 32
Digital Crosstalk
A measure of the impulse injected into the analog output of one
DAC from the digital inputs of another DAC but is measured
when the DAC output is not updated. It is specified in nanovolt-
seconds (nV-sec) and measured with a full-scale code change
on the data bus; that is, from all 0s to all 1s, and vice versa.
Thermal Hysteresis
The change of reference output voltage after the device is cycled
through temperatures from −40°C to +85°C and back to −40°C.
This is a typical value from a sample of parts put through such
a cycle.