Datasheet

AD5749 Data Sheet
Rev. B | Page 20 of 28
Bit Description
CLRSEL Sets clear mode to zero scale or midscale. See the Asynchronous Clear (CLEAR) section.
CLRSEL Function
0 Clear to zero-scale.
1 Clear to midscale.
OUTEN Output enable bit. This bit must be set to 1 to enable the output.
CLEAR Software clear bit; active high.
RSET
Select internal/external current sense resistor.
RSET Function
1 Select internal current sense resistor; used with R3 to R0 bits to select range.
0 Select external current sense resistor; used with R3 to R0 bits to select range.
RESET Resets the part to its power-on state.