Datasheet

Data Sheet AD5735
Rev. C | Page 7 of 48
AC PERFORMANCE CHARACTERISTICS
AV
DD
= V
BOOST_x
= 15 V; AV
SS
= −15 V; DV
DD
= 2.7 V to 5.5 V; AV
CC
= 4.5 V to 5.5 V; dc-to-dc converter disabled; AGND = DGND =
GNDSW
x
= 0 V; REFIN = 5 V; voltage outputs: R
L
= 2 kΩ, C
L
= 220 pF; current outputs: R
L
= 300 Ω; all specifications T
MIN
to T
MAX
,
unless otherwise noted.
Table 2.
Parameter
1
Min Typ Max Unit Test Conditions/Comments
DYNAMIC PERFORMANCE, VOLTAGE
OUTPUT
Output Voltage Settling Time 11 µs 5 V step to ±0.03% FSR, 0 V to 5 V range
18 µs 10 V step to ±0.03% FSR, 0 V to 10 V range
Slew Rate 1.9 V/µs 0 V to 10 V range
Power-On Glitch Energy 150 nV-sec
Digital-to-Analog Glitch Energy 6 nV-sec
Glitch Impulse Peak Amplitude 25 mV
Digital Feedthrough
1
nV-sec
DAC-to-DAC Crosstalk 2 nV-sec 0 V to 10 V range
Output Noise (0.1 Hz to 10 Hz
Bandwidth)
0.01 LSB p-p 12-bit LSB, 0 V to 10 V range
Output Noise Spectral Density 150 nV/√Hz Measured at 10 kHz, midscale output, 0 V to
10 V range
AC PSRR 83 dB 200 mV, 50 Hz/60 Hz sine wave superimposed
on power supply voltage
DYNAMIC PERFORMANCE, CURRENT
OUTPUT
Output Current Settling Time 15 µs To 0.1% FSR, 0 mA to 24 mA range
See Test Conditions/Comments ms For settling times when using the dc-to-dc con-
verter, see Figure 47, Figure 48, and Figure 49
Output Noise (0.1 Hz to 10 Hz
Bandwidth)
0.01 LSB p-p 12-bit LSB, 0 mA to 24 mA range
Output Noise Spectral Density
0.5
nA/√Hz
Measured at 10 kHz, midscale output, 0 mA
to 24 mA range
1
Guaranteed by design and characterization; not production tested.