Datasheet

Data Sheet AD5726
Rev. C | Page 7 of 20
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted. Transient currents up to
100 mA do not cause SCR latch-up.
Table 5.
Parameter
Rating
AV
SS
to GND +0.3 V to −17 V
AV
DD
to GND
−0.3 V to +17 V
AV
SS
to AV
DD
−0.3 V to +34 V
AV
SS
to V
REFN
−0.3 V to +AV
SS
− 2 V
Current into Any Pin ±15 mA
Digital Input Voltage to GND
−0.3 V to +7 V
Digital Output Voltage to GND
−0.3 V to +7 V
Operating Temperature Range
Industrial −40°C to +125°C
Storage Temperature Range −65°C to +150°C
Junction Temperature (T
J
max) 145°C
Lead Temperature
JEDEC industry standard
Soldering
J-STD-020
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θ
JA
is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 6.
Package Type θ
JA
θ
JC
Unit
16-Lead SSOP
151
28
°C/W
16-Lead SOIC
124.9
42.9
°C/W
20-Lead SSOP
126
46
°C/W
ESD CAUTION