Datasheet

AD5725 Data Sheet
Rev. C | Page 8 of 20
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C unless otherwise noted. Transient currents of up to
100 mA do not cause SCR latch-up.
Table 5.
Parameter Rating
AV
SS
to DGND +0.3 V to −16.5 V
AV
DD
to DGND −0.3 V to +16.5 V
AV
SS
to AV
DD
+0.3 V to −33 V
V
L
to DGND −0.3 V to +7 V
Current into Any Pin ±15 mA
Digital Pin Voltage to DGND −0.3 V to +7 V
Operating Temperature Range
Industrial −40°C to +85°C
Storage Temperature Range −65°C to +150°C
Junction Temperature (T
J
max) 150°C
28-Lead SSOP Package
θ
JA
Thermal Impedance 100°C/W
θ
JC
Thermal Impedance 39°C/W
Power Dissipation Package
(Derate 10 mW/°C Above 60°C)
900 mW
Reflow Soldering
Time at Peak Temperature 10 sec to 40 sec
Lead Temperature (Soldering, 60 sec) 300°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those listed in the operational sections
of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION