Datasheet

AD5450/AD5451/AD5452/AD5453 Data Sheet
Rev. G | Page 6 of 28
ABSOLUTE MAXIMUM RATINGS
Transient currents of up to 100 mA do not cause SCR latch-up.
T
A
= 25°C, unless otherwise noted.
Table 3.
Parameter Rating
V
DD
to GND −0.3 V to +7 V
V
REF
, R
FB
to GND −12 V to +12 V
I
OUT
1 to GND −0.3 V to +7 V
Input Current to Any Pin Except Supplies ±10 mA
Logic Inputs and Output
1
−0.3 V to V
DD
+ 0.3 V
Operating Temperature Range, Extended
(Y Version)
−40°C to +125°C
Storage Temperature Range −65°C to +150°C
Junction Temperature 150°C
θ
JA
Thermal Impedance
8-Lead MSOP
206°C/W
8-Lead TSOT
211°C/W
Lead Temperature, Soldering (10 sec) 300°C
IR Reflow, Peak Temperature (<20 sec) 235°C
1
Overvoltages at SCLK,
SYNC
, and SDIN are clamped by internal diodes.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION