Datasheet

Data Sheet AD5172/AD5173
Rev. I | Page 19 of 28
LAYOUT CONSIDERATIONS
In PCB layout, it is a good practice to employ compact, minimum
lead length design. The leads to the inputs should be as direct as
possible with a minimum conductor length. Ground paths should
have low resistance and low inductance.
Note that the digital ground should also be joined remotely to
the analog ground at one point to minimize the ground bounce.
V
DD
GND
V
DD
C1
10µF
C2
0.1µF
AD5172
+
04103-036
Figure 47. Power Supply Bypassing