Datasheet

AD210 PIN DESIGNATIONS
Pin Designation Function
1 V
O
Output
2O
COM
Output Common
3+V
OSS
+Isolated Power @ Output
4–V
OSS
–Isolated Power @ Output
14 +V
ISS
+Isolated Power @ Input
15 –V
ISS
–Isolated Power @ Input
16 FB Input Feedback
17 –IN –Input
18 I
COM
Input Common
19 +IN +Input
29 Pwr Com Power Common
30 Pwr Power Input
AD210–SPECIFICATIONS
(typical @ +258C, and V
S
= +15 V unless otherwise noted)
Model AD210AN AD210BN AD210JN
GAIN
Range 1 V/V – 100 V/V * *
Error ±2% max ±1% max *
vs. Temperature(0°C to +70°C) +25 ppm/°C max * *
(–25°C to +85°C) ±50 ppm/°C max * *
vs. Supply Voltage ±0.002%/V * *
Nonlinearity
1
±0.025% max ±0.012% max *
INPUT VOLTAGE RATINGS
Linear Differential Range ±10 V * *
Maximum Safe Differential Input ±15 V * *
Max. CMV Input-to-Output *
ac, 60 Hz, Continuous 2500 V rms * 1500 V rms
dc, Continuous ±3500 V peak * ±2000 V peak
Common-Mode Rejection *
60 Hz, G = 100 V/V *
R
S
≤ 500 Ω Impedance Imbalance 120 dB * *
Leakage Current Input-to-Output *
@ 240 V rms, 60 Hz 2 µA rms max * *
INPUT IMPEDANCE
Differential l0
12
Ω **
Common Mode 5 GΩi5pF * *
INPUT BIAS CURRENT
Initial, @ +25°C 30 pA typ (400 pA max) * *
vs. Temperature (0°C to +70°C) 10 nA max * *
(–25°C to +85°C) 30 nA max * *
INPUT DIFFERENCE CURRENT
Initial, @ +25°C 5 pA typ (200 pA max) * *
vs. Temperature(0°C to + 70°C) 2 nA max * *
(–25°C to +85°C) 10 nA max * *
INPUT NOISE
Voltage (l kHz) 18 nV/√
Hz **
(10 Hz to 10 kHz) 4 µV rms * *
Current (1 kHz) 0.01 pA/√Hz **
FREQUENCY RESPONSE
Bandwidth (–3 dB) *
G = 1 V/V 20 kHz * *
G = 100 V/V 15 kHz * *
Settling Time (±10 mV, 20 V Step) *
G = 1 V/V 150 µs* *
G = 100 V/V 500 µs* *
Slew Rate (G = 1 V/V) 1 V/µs* *
OFFSET VOLTAGE (RTI)
2
Initial, @ +25°C ±15 ±45/G) mV max (±5 ±15/G) mV max *
vs. Temperature (0°C to +70°C) (±10 ±30/G) µV/°C* *
(–25°C to +85°C) (±10 ±50/G) µV/°C* *
RATED OUTPUT
3
Voltage, 2 kΩ Load ±10 V min * *
Impedance 1 Ω max * *
Ripple (Bandwidth = 100 kHz) 10 mV p-p max * *
ISOLATED POWER OUTPUTS
4
Voltage, No Load ±15 V * *
Accuracy ±10% * *
Current ±5mA * *
Regulation, No Load to Full Load See Text * *
Ripple See Text * *
POWER SUPPLY
Voltage, Rated Performance +15 V dc ± 5% * *
Voltage, Operating +15 V dc ± 10% * *
Current, Quiescent 50 mA * *
Current, Full Load – Full Signal 80 mA * *
TEMPERATURE RANGE
Rated Performance –25°C to +85°C* *
Operating –40°C to +85°C* *
Storage –40°C to +85°C* *
PACKAGE DIMENSIONS
Inches 1.00 × 2.10 × 0.350 * *
Millimeters 25.4 × 53.3 × 8.9 * *
NOTES
*Specifications same as AD210AN.
1
Nonlinearity is specified as a % deviation from a best straight line..
2
RTI – Referred to Input.
3
A reduced signal swing is recommended when both ±V
ISS
and ±V
OSS
supplies are fully
loaded, due to supply voltage reduction.
4
See text for detailed information. _
Specifications subject to change without notice.
REV. A
–2–
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
AC1059 MATING SOCKET
CAUTION
ESD (electrostatic discharge) sensitive device. Elec-
trostatic charges as high as 4000 V readily accumu-
late on the human body and test equipment and can
discharge without detection. Although the AD210
features proprietary ESD protection circuitry, per-
manent damage may occur on devices subjected to
high energy electrostatic discharges. Therefore,
proper ESD precautions are recommended to avoid
performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE