User`s guide

August 2012L010185
14
Program Window
Motion Profi le Select motion profi les 1, or 2.
Send Accel/Decel Send the acceleration & deceleration parameter to the indexer. (steps/sec
2
)
Send Base Spend Send the base speed parameter to the indexer. (steps/sec)
Send Max Speed Send the maximum speed parameter to the indexer. (steps/sec)
Send Index Number Send the index number parameter to the indexer. (steps)
Begin Motion
Motor will ramp up to maximum speed and keep moving until a limit switch is
triggered or the index is complete.
Soft Limit
Motor will ramp down to base speed and continue running until the index is
complete.
Hard Limit Stop any motor motion.
Direction Set direction to clockwise or counter-clockwise.
Reduced Current Set reduced current on or off.
Verify Parameters Updates and displays controllers parameters and resets the error codes.