Specifications

SECTION 12 ERROR CODES
62
USING HYPER TERMINAL
SETTING PARAMETERS
Windows 95 or 98 Is recommended when running this program.
Exit the SMC40 Software before attempting to run Hyper Terminal Program.
1. The first thing you need to do is to Find the Hyper Terminal EXE. At the bottom left corner of your
Windows screen is the Start button. Click this icon to locate the Find All Files folder.
2. Click on this Find Icon .
3. Type in under the Named: Hyper Terminal .
Make sure Look in: Harddrive (C:) is
displayed.
4 Once located, the Hyper Terminal will need to designate a Name and Icon. Name HyperTerminal
COMM1 or COMM2 depending on the available Comport.
Warning: Press the Cancel Button if your
computer tries to select a modem
communications. This setup is not meant for
modem communication, it is meant to
establish Port Communications with the
SMC40 Controller.