Specifications

SECTION 10 SPECIFICATIONS
56
SECTION 10 - SPECIFICATIONS
Power Requirements
7A
Fuse
Power Requirements for PCL Versions
105/ 125 VAC, 50/60Hz ( Standard Package )
7 Amp, 5mm, Fast blow type
Littlefuse: 217005
210/ 250VAC, 50/60 Hz ( X250 Version )
7 Amp, 3AG, Fast blow type
9 –12 VAC 50/60 Hz
+5VDC @ 1.5 Amp
+12 – 16 VDC UNREG @ 1.5 Amp
NOTE: Any External Electric Component current
(Amp) consumption should be taken into account..
Operating Temperature 0 to 60 degree C
Driver Output Current Rating 1 to 7.0 Amp per phase ( DPD72401,DPK Series)
1 to 6.0 Amp per phase ( DPD60401)
Control Inputs TTL-CMOS Compatible
Logic "0": 0 to 0.8 VDC
Logic "1": 3.5 to 5.DC
Pulse Output Range 1 to 2,500,000
Outputs (CLK, DIR, PWR):
TTL-CMOS compatible
Logic "0":
Logic "1":
0 to 0.32 VDC, 4 Ma
4.3 to 5.1 VDC, 4 Ma
Baud Rate:
RS422 Input
Logic "0"
Logic "1"
sensitivity
50 to 38400 BAUD
-2 to -10 VDC, 1.5 Ma
2 to 10 VDC, -2.5 Ma
200 mV
RS422 Output:
Voltage Output High
Voltage Output Low
2.5 VDC min, 20 Ma
0.5 VDC max, 20 Ma
RS232 Input
Logic "0"
Logic "1"
sensitivity
2 to 10 VDC, 1.5 mA
-2 to -10 VDC, -2.5 mA
200 mV
RS232 Output
Logic "0"
Logic "1"
0.5 VDC max, 20 mA
2.5 VDC min, 20 mA
Encoder Quadrature only
Inputs TTL-CMOS Compatible
Logic "0":
Logic "1":
5 VDC @ 10ma Max
0 to 0.32 VDC, 4 Ma
4.3 to 5.1 VDC, 4 Ma
Data Format: Half-Duplex, 1 start bit, 8 data bits, no parity
Outputs (24 programmable I/O):
Maximum voltage:
Current sink:
NOTE: Always use a Diode (Motorola 1N4002 or Equivalent) to
clamp any Inductive Loads (Relays, Solenoids, etc.) due to fly
back voltages.
+5VDC Output ( PCL401 ,DPD72401, and DPD60401)
+5VDC Output ( PCL402, PCL403, DPK72402,and DPK7403)
Open Collector Type
40 VDC
500 ma (total, for outputs 1 - 8)
500 ma (total, for outputs 9 - 16)
500 ma (total, for outputs 17 - 24)
Maximum Current Sourcing 0.75 AMPS
Maximum Current Sourcing 0.75 AMPS