Specifications

SECTION 8 COMMAND DESCRIPTIONS

ACCEL/DECEL COMMAND( 1 - 1,000,000 )

This defines the acceleration/deceleration (or ramping) of the motor.

Line Command Parameter 1 Parameter 2 Comments

1 X Accel/Decel 500

SPEED LIMIT COMMAND

This Command sets the limit for the Base Speed and the Max Speed. The Default value is

20,000. This should always be kept at the highest speed that the motor would ever be run at.

SLOW JOG SPEED COMMAND

This Command presets the Run Speed when the users sets the Slow Jog+ or Fast Jog- to 0VDC.

This function is usually used to manually position the motor.

FAST JOG SPEED COMMAND

This Command presets the Run Speed when the users sets the Fast Jog+ or Fast Jog- to 0VDC.

This function is usually used to manually position the motor.