Specifications

SECTION 7 INTELLIGENT SOFTWARE
36
SECTION 7-INTELLIGENT SOFTWARE
DESCRIPTION
Included with a SMC40 purchase Driver
Pack is a Windows software package that is
used to program the SMC40 indexer. This
software will allow for easy programming of
the Driver Pack. The SMC40 software runs
on Microsoft Windows 3.1 (Version 1.12) or
Windows 95/ 98/ NT (Version 1.13).
INSTALLATION
Windows 3.1
To install the software you need to go into Windows. From the Program Manager select the menu File,
and then Run. Put the Intelligent Indexer Disk in the appropriate disk drive and select Setup.
It might look like: A:\setup .exe
Follow the instructions on the screen.
Windows 95/ 98/ NT
Put the Intelligent Indexer Disk in the appropriate disk drive.
Go to the Start Button, and Select Run. Choose A:\setup.exe and follow the instructions on the screen.
SOFTWARE DEFAULTS
Run the Intelligent Indexer Software by Double Clicking the SMC40 Program File in Windows.
The Defaults are:
Com Port Com1
Baud Rate 9600
Units Steps
Number of Axes 1