Specifications

SECTION 2 QUICK START

To begin programming place the cursor on the line you wish to

enter the command.

Select the Add button by clicking it once on the main

programming screen.

This will take you into the select command programming screen.

Select the Motion Profile Button.

Select the highlighted Base Speed and enter 500 for the

Value. Click OK.

This will take you back out to the main programming screen.

You will see that line 1 now reads Base Speed 500 on Line 1.

Note: For Single-Axis units, an X will precede many of the

commands.

Line Command Parameter 1

1 Base Speed 500

Repeat the same process when entering the rest of the

commands.

Turn to the next page to continue the test program.