Datasheet

PAGE: 1 OF 8
KS0107/0108 or equ. PROGRAMMING INSTRUCTIONS FOR
128x64 BIT MAP TYPE LCD-MODULES
ANAG VISION
ANAG VISION
PRELIMINARY
Display control instruction
The LCD Module has built in the KS0107 (or equivalent type), an LCD driver LSI with 64 channel
outputs for dot matrix liquid crystal graphic display systems. It generates the timing signal to control
the 2 KS0108 (or equivalent type) which are the 64 channel ourput LCD driver LSIs for dot matrix
liquid crystal graphic display systems. They provide the display RAM, 64 data latch, the 64 drivers
and decoder logics. The internal RAM stores the display data transfered from the micro controler
and generates the dot matrix liquid crystal driving signals corresponding to stored data.
128X64 DOT GRAPHIC MODULES PROGRAMMING
1
2
3
4
5
6
10
11
12
13
14
15
16
Interface Description according to series AV128641
7
8
9
18
20
19
17
D/I
GND
0V
5VVDD
VLCD Variable
Ground
PIN No. Symbol Level Discription
Supply Voltage for Logic
Operating Voltage for LCD
H/L
H/L
H
R/W
E
H/L
H/L
H/L
H/L
H/L
H/L
H/L
H/L
L
L
L
DB0
DB1
DB2
DB0
DB0
DB0
DB0
DB0
CS1
CS2
RST
Vout
A
K
H: Data, L: Instruction
H: Read (MPU Module), L: Write (MPU Module)
Enable Signal
Data Bit 0
Data Bit 1
Data Bit 2
Data Bit 3
Data Bit 4
Data Bit 5
Data Bit 6
Data Bit 7
Select Column 1 ~ Column 64
Select Column 65 ~ Column 128
Rest Signal
Negative Voltage
Power Supply for LED B/L (+)
Power Supply for LED B/L (-)