Manualshelf

Use and Care Manual

ManualsBrandsamzchef ManualsAppliances3 in 1 Stainless Steel Pasta Roller and Cutter Attachment for KitchenAid Stand Mixer with 8-Thickness Settings
12345678910
USING THE PASTA ROLLER AND CUTTERS
Insert attachment shaft housing into the
attachment hub, making certain the power
shaft fits into the square hub socket.
If necessary, rotate the Pasta Roller or
Cutter back and forth The pin on the
attachment housing fits into the notch
of the hub rim when in the proper position.
3
Prepare pasta dough (see"Recipe"
section). Cut dough into sections
hat fit in the Pasta Roller
1
Pull the Pasta roller adjustment knob
straight out and turn to setting 1.Release
the knob, making certain the pin on the
Pasta roller housing engages the opening
on the back of the adjustment knob,
allowing the knob to fit flush against the
roller housing.
2
Tighten the Stand Mixer attachment
hub knob until the attachment is
completely secured to the Stand Mixer.
4
MAKING PASTA
When using the Pasta Roller and Cutters，do not wear ties,scarves,
loose clothing or long necklaces;gather long hair with a clasp.
IMPORTANT:
5