Daim Ntawv Qhia Tus Neeg Siv

Phone: [phone] | Fax: [phone]
[e-mail] | amysystems.com
Amysystems, an Amylior
Inc
. brand
Bluetooth Pairing Quick Start Guide
R-Net Advanced Joystick
and OMNI 2
Steps for pairing either the Advance Joystick or the OMNI 2
with any devices (Android, Apple or PC):
1 - TURN ON THE BLUETOOTH MODE ON THE JOYSTICK/OMNI 2:
• In the settings menu, select Bluetooth. (To enter the settings
menu, press and hold top button: on the left of the screen
for the joystick; and on the right of the screen
for the OMNI 2).
• Set target device(s) to < On>. (“Mouse” for Android
or PC and “iDevice” for Apple products)
• The joystick/OMNI 2 must be switched off and on again.
2 - SET THE JOYSTICK OR OMNI 2 IN DISCOVERY MODE:
• On the joystick/OMNI 2, navigate to the Bluetooth mode
by pressing the <mode> button.
• For the joystick: Toggle forward and hold until a beep is
heard (about 10 seconds). Then, toggle backward and hold
until a beep is heard (about 10 seconds).
• For the OMNI 2: Press the top arrow on the push-button and
hold until a beep is heard (about 10 seconds). Then, press
the bottom arrow on the push-button and hold until a beep
is heard (about 10 seconds).
• The Bluetooth symbol should blink on the top of the screen.
This means that the joystick/OMNI 2 is in discovery mode.
3 - THE DEVICE CAN NOW BE PAIRED WITH THE JOYSTICK OR THE OMNI 2...
For more information on how to pair a device with either the joystick or the OMNI 2, or on the Bluethooth functionality,
please refer to the Curtiss-Wright document (Chapter 6)
on our website at www.amylior.com.
IG | P18032 | 1001837 | EN | Rev.02
Phone: [phone] | Fax: [phone]
[e-mail] | amylior.com
Bluetooth mode