Instruction manual
Table Of Contents
- ViewPoint Wireless Touch Panels
- Introduction
- Product Pics and Specs
- Connections, Cleaning, and Charging
- Touch Panel Basics
- Designing Touch Panel Pages
- Overview
- Activating the Edit button
- Setting the Device Base
- Setting the Device Used
- Creating a Page
- Creating a Button
- Button Properties
- Using TPDesign3 to Download Bitmaps, Icons, and Fonts
- Button Properties for External Pushbuttons
- Creating an IR Macro Button
- Creating a Joystick
- Creating a Bargraph
- Linking the New Page to the Main Page
- Exiting Edit Mode
- Programming
- Overview
- PC to ViewPoint Connections
- Programming the ViewPoint
- Programming Changes
- Serial Commands
- System Send_Commands
- Gray Scale and Programming Numbers
- Colors/Shades of Gray and Programming Numbers
- Font Styles and Programming Numbers
- Border Styles and Programming Numbers
- Shorthand Send Commands
- Color/Gray Scale Send_Commands
- Variable Text Send_Commands
- Shorthand Variable Text Commands
- Buttons String Commands
- Button IR Macro Commands
- Loading Infrared (IR) Files
- Upgrading the Firmware
- Contacting Sales and Technical Support
- Index
ViewPoint Wireless Touch Panels Designing Touch Panel Pages 55
6. Press BUTTON TYPE to open the BUTTON TYPE menus shown in Figure 72.
7. Select VERTICAL BARGRAPH to open the Button Properties page for Vertical
Bargraphs shown in Figure 73.
Setting the bargraph properties
Use the Button Properties page for Vertical Bargraphs shown in Figure 73 to set
channel, level, and button colors.
Figure 72
BUTTON TYPE menus
Note
One-way ViewPoint touch
panels do not support variable
text.
Figure 73
Button Properties page for
Vertical Bargraphs