Instruction manual
Table Of Contents
- ViewPoint Wireless Touch Panels
- Introduction
- Product Pics and Specs
- Connections, Cleaning, and Charging
- Touch Panel Basics
- Designing Touch Panel Pages
- Overview
- Activating the Edit button
- Setting the Device Base
- Setting the Device Used
- Creating a Page
- Creating a Button
- Button Properties
- Using TPDesign3 to Download Bitmaps, Icons, and Fonts
- Button Properties for External Pushbuttons
- Creating an IR Macro Button
- Creating a Joystick
- Creating a Bargraph
- Linking the New Page to the Main Page
- Exiting Edit Mode
- Programming
- Overview
- PC to ViewPoint Connections
- Programming the ViewPoint
- Programming Changes
- Serial Commands
- System Send_Commands
- Gray Scale and Programming Numbers
- Colors/Shades of Gray and Programming Numbers
- Font Styles and Programming Numbers
- Border Styles and Programming Numbers
- Shorthand Send Commands
- Color/Gray Scale Send_Commands
- Variable Text Send_Commands
- Shorthand Variable Text Commands
- Buttons String Commands
- Button IR Macro Commands
- Loading Infrared (IR) Files
- Upgrading the Firmware
- Contacting Sales and Technical Support
- Index
ViewPoint Wireless Touch Panels Connections, Cleaning, and Charging 11
Connections, Cleaning, and
Charging
Overview
The ViewPoint Wireless Touch Panels do not require hardware installation. This sec-
tion describes how to connect, clean, and charge the ViewPoint panels.
Application
Figure 8 illustrates a sample NetWave ViewPoint Touch Panel application.
Figure 8
Sample NetWave ViewPoint
Touch Panel application
VPN-
CP ViewPoint Touch Panel
AXlink
Power
Supply
AXR-NWS
(rear view)
Controller
Mini co
n
nector (3.5 mm)
AXlink connector