Instruction manual
Table Of Contents
- ViewPoint Wireless Touch Panels
- Introduction
- Product Pics and Specs
- Connections, Cleaning, and Charging
- Touch Panel Basics
- Designing Touch Panel Pages
- Overview
- Activating the Edit button
- Setting the Device Base
- Setting the Device Used
- Creating a Page
- Creating a Button
- Button Properties
- Using TPDesign3 to Download Bitmaps, Icons, and Fonts
- Button Properties for External Pushbuttons
- Creating an IR Macro Button
- Creating a Joystick
- Creating a Bargraph
- Linking the New Page to the Main Page
- Exiting Edit Mode
- Programming
- Overview
- PC to ViewPoint Connections
- Programming the ViewPoint
- Programming Changes
- Serial Commands
- System Send_Commands
- Gray Scale and Programming Numbers
- Colors/Shades of Gray and Programming Numbers
- Font Styles and Programming Numbers
- Border Styles and Programming Numbers
- Shorthand Send Commands
- Color/Gray Scale Send_Commands
- Variable Text Send_Commands
- Shorthand Variable Text Commands
- Buttons String Commands
- Button IR Macro Commands
- Loading Infrared (IR) Files
- Upgrading the Firmware
- Contacting Sales and Technical Support
- Index
100 Loading Infrared (IR) Files ViewPoint Wireless Touch Panels
4. After the Database has been created, press F5 and select Configure. Figure 106
appears.
5. Select your computer’s Com port and baud rate that you wish to communicate
with the ViewPoint touch panel.
6. Then, press F10.
7. When the Communications screen has disappeared, press F1 on your computer
keyboard. Use the up/down arrow keys and select Change Directory. The dialog
in Figure 107 appears.
Figure 106
Communications settings
Note
Make sure that the ViewPoint
touch panel is set to the same
Baud rate as your computer.
Figure 107
Change Directory dialog