User Guide

Appendix C: Using an IRIS IR Capture Unit

199

isualArchitect v1.1

CONFIDENTIAL AND PROPRIETARY. COPYRIGHT, AMX LLC, 2006

3. The two digits that appear in the display represent the current baud rate setting.

4. Press the up or down pushbuttons to reset the baud rate.

5. Press and hold the up, down, and send pushbuttons again to set the new baud rate. The Ready LED

lights to indicate the IRIS unit is ready to capture a RC function.

IRIS - Baud Rate And Display Digits

IRIS - Cables And Adapters

Depending on your IRLIB programming configuration, one or more cables may be required. Connectors

are shown from the wiring side.

Computer-to-NetLinx Control System (DB-25 to DB-9):

Computer-to-NetLinx Control System (DB-9 to DB-9):

Baud Rate And Display Digits

Baud Rate Display Digits

• 300 03

• 600 06

• 1200 12

• 2400 24

• 4800 48

• 9600 96

FIG. 127

Computer-to-NetLinx Control System (DB-25 to DB-9) wiring diagram

FIG. 128 Computer-to-NetLinx Control System (DB-9 to DB-9) wiring diagram