User Guide

Setting Device Properties
89
V
isualArchitect v1.1
CONFIDENTIAL AND PROPRIETARY. COPYRIGHT, AMX LLC, 2006
Mio Modero Keypad Device Addressing
1. If connected, disconnect the power supply.
2. Locate the 8-position Device DIP switch on the rear panel.
3. Set the DIP switch according to the switch values shown below:
 The device number is set by the total value of DIP switch positions that are ON.
 If you later change the device number, remove and reconnect the AXlink power connector to
enter the new device number into memory.
Switch 12345 6 7 8
Value 1 2 4 8 16 32 64 128