User Guide

ViewStat Programming Protocol
9
ViewStat Communicating Thermostat - Programming Protocol Reference Guide
Programming Quick Reference (Cont.)
Command Description Value
Auxiliary Information Commands
EQUIPCONFIG Reports the setting of the thermostat configu-
ration DIP switches
Read Only
BLREADY Reports ready state of photosensor 0 = Backlight in ready state,
1 = Backlight not in ready state.
BLTRIG Sets relative room light intensity level required
to put backlight in ready state
0 = darker,
1=lighter
BLTON Turns on backlighting, regardless of ready
state, for 10 seconds.
No value required for this command
ENTR Enter button status 1 = State change from inactive to active,
0 = State change from active to inactive
SCUP Scroll Up button status 1 = State change from inactive to active,
0 = State change from active to inactive
SCDN Scroll Down button status 1 = State change from inactive to active,
0 = State change from active to inactive