User`s guide

Blackfin USB-LAN EZ-Extender Manual 2-1
2 USB-LAN EZ-EXTENDER
HARDWARE REFERENCE
This chapter describes the hardware design of the USB-LAN
EZ-Extender.
The following topics are covered.
• “System Architecture” on page 2-2
Describes the configuration of the extension board and explains
how the board components interface with the processor and
EZ-KIT Lite.
• “Jumper Setting” on page 2-3
Describes the function of the configuration jumpers JP1–3.
• “Switch Settings” on page 2-6
Describes the function of the switches SW1.1–1.3.