User manual

25
Using the Belkin Wireless LAN Monitor Utility
25
section
2
1
3
4
5
6
7
8
4. For home or small business users select “WPA-PSK” under
“Network Authentication”.
Note: Select WPA if you are using this computer to connect to a
corporate network that supports an authentication server such
as a radius server, please consult your network administrator for
further information.
5. Select “TKIP” or “AES” under “Data Encryption”. This setting will
have to be identical to the wireless router that you set up.
6. Type in your encryption key in the “Network key” box.
Important: Enter your pre-shared key. This can be from 8 to 63
characters and can be letters, numbers, or symbols. This same key
must be used on all of the clients that you set up.
7. Click “OK” to apply settings.
Setting up Windows XP WZC Utility to use WPA
Note: If you have not already, you must download the WPA update
from Microsoft Windows Update to enable WPA support. This can
be found at the Microsoft website by searching for the term “WPA
Wireless”. Locate the update called KB826942, download it and
update your operating system.