Specifications

NI cRIO-9030 Getting Started Guide | © National Instruments | 5
 A number 2 Phillips screwdriver
 A number 1 Phillips screwdriver
 A small flat-blade screwdriver
 Ethernet cable (optional)
Preparing the Environment
Ensure the environment where you are using the controller meets the following specifications.
Operating temperature
(IEC 60068-2-1, IEC 60068-2-2) ..................... -20 °C to 55 °C
Operating humidity (IEC 60068-2-56) ............. 10% to 90% RH, noncondensing
Pollution Degree ............................................... 2
Maximum altitude............................................. 5,000 m
Indoor use only.
Note Refer to the NI cRIO-9030 Operating Instructions and Specifications on
ni.com/manuals for complete specifications.