Operating instructions

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 43

Operating vibration

Random (IEC 60068-2-64)....................... 5 g

rms

, 10 to 500 Hz

Sinusoidal (IEC 60068-2-6) ..................... 5 g, 10 to 500 Hz

Operating shock (IEC 60068-2-27) .................. 30 g, 11 ms half sine, 50 g, 3 ms half sine,

18 shocks at 6 orientations

Safety and Hazardous Locations Standards

This product is designed to meet the requirements of the following electrical equipment safety

standards for measurement, control, and laboratory use:

• IEC 61010-1, EN 61010-1

• UL 61010-1, CSA 61010-1

• EN 60079-0:2012, EN 60079-15:2010

• IEC 60079-0: Ed 6, IEC 60079-15; Ed 4

• UL 60079-0; Ed 5, UL 60079-15; Ed 3

• CSA 60079-0:2011, CSA 60079-15:2012

Note For UL and other safety certifications, refer to the product label or the Online

Product Certification section.

Electromagnetic Compatibility

This product meets the requirements of the following EMC standards for sensitive electrical

equipment for measurement, control, and laboratory use:

• EN 61326-1 (IEC 61326-1): Class A emissions; Industrial immunity

• EN 55011 (CISPR 11): Group 1, Class A emissions

• EN 55022 (CISPR 22): Class A emissions

• EN 55024 (CISPR 24): Immunity

• AS/NZS CISPR 11: Group 1, Class A emissions

• AS/NZS CISPR 22: Class A emissions

• FCC 47 CFR Part 15B: Class A emissions

• ICES-001: Class A emissions

Note In the United States (per FCC 47 CFR), Class A equipment is intended for use

in commercial, light-industrial, and heavy-industrial locations. In Europe, Canada,

Australia and New Zealand (per CISPR 11) Class A equipment is intended for use

only in heavy-industrial locations.

Note Group 1 equipment (per CISPR 11) is any industrial, scientific, or medical

equipment that does not intentionally generate radio frequency energy for the

treatment of material or inspection/analysis purposes.