Operating instructions

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 39
USB Ports
Number of ports
Device ports.............................................. 1 standard B connector
Host ports.................................................. 2 standard A connectors
USB interface ................................................... USB 2.0, Hi-Speed
Maximum data rate........................................... 480 Mb/s per port
Maximum current (USB Host Ports) ................ 1 A (aggregate)
Mini DisplayPort
Maximum resolution ........................................ 2560 × 1600 at 60 Hz
SD Card Slot
SD card support ................................................ SD and SDHC standards
Memory
Nonvolatile
1
SD removable (user supplied) .................. Up to 32 GB
SSD........................................................... 4GB
System memory ................................................ 1 GB DDR3L
Note For information about the life span of the nonvolatile memory and about best
practices for using nonvolatile memory, go to ni.com/info and enter Info Code
ssdbp.
Data throughput
System memory to
SD removable storage
2
............................. 10 MB/s
Module slots to system memory............... 20 MB/s, application and system dependent
Reconfigurable FPGA
FPGA type ........................................................ Xilinx Kintex-7 7K70T
Number of flip-flops ......................................... 82,000
Number of 6-input LUTs................................... 41,000
Number of DSP slices
(18 x 25 multipliers) ......................................... 240
Available block RAM........................................ 4,860 kbits
1
1 MB is equal to 1 million bytes. 1 GB is equal to 1 billion bytes; formatted capacity might be less.
2
Consult the SD removable storage manufacturer’s specifications.