Operating instructions

NI cRIO-9030 Operating Instructions and Specifications | © National Instruments | 25
Figure 16. Side View of the Controller Mounted on a Desktop, with Dimensions
cRIO Controller Features
The cRIO controller features many ports, LEDs, a RESET button, a power button, and an SD
card slot. Refer to Figure 1 for the locations of these features on the cRIO controller.
Mini DisplayPort
Use the mini DisplayPort connector, shown in Figure 1, to connect a monitor to implement a
local HMI for Real-Time cRIO controllers. You can use a single real-time VI to iteratively
develop both your user interface and system logic. For more information, refer to the Using the
Embedded UI to Access RT Target VIs topic in the LabVIEW Help.
Use an appropriate adapter cable, as listed in Table 8, to connect the Mini DisplayPort to VGA
or DVI.
127.23 mm
(5.01 in.)
132.82 mm
(5.23 in.)