Operating instructions

24 | ni.com | NI cRIO-9030 Operating Instructions and Specifications
Mounting the Controller on a Rack
NI offers two rack mount kits, part numbers 779102-01 and 781989-01, that you can use to
mount the NI cRIO controller and other DIN rail-mountable equipment on a standard 19-inch
(482.6 mm) rack. You must order the NI DIN rail mount kit, part number 157254-01, in addition
to a rack mount kit.
Mounting the Controller on a Desktop
You can use the NI Desktop Mounting Kit, part number 779473-01, to mount the controller on
a desktop.
1. Align one of the end brackets with the mounting hole on one of the ends of the controller.
2. Use a #2 Phillips screwdriver to tighten the captive screw on the end of the bracket.
3. Repeat step 2 to attach the other end bracket.
Figure 15. Front View of the Controller Mounted on a Desktop, with Dimensions
NI cRIO-9030
88.11 mm
(3.47 in.)
8.55 mm
(0.34 in.)
117.20 mm
(4.61 in.)
107.00 mm
(4.21 in.)
219.48 mm
(8.64 in.)