Operating instructions

22 | ni.com | NI cRIO-9030 Operating Instructions and Specifications
You must use these screws because they are the correct depth and thread for the panel
mounting plate. Tighten the screws to a maximum torque of 1.3 N · m (11.5 lb · in.).
Figure 11. Installing the Panel Mounting Plate on the Controller
Figure 12. Dimensions of Controller with Panel Mounting Plate Installed
2. Fasten the panel mounting plate to the surface using the screwdriver and screws that are
appropriate for the surface. The maximum screw size is M5 or number 10.
NI cRIO-9030
108.84 mm (4.26 in.)
25.41 mm
(1.00 in.)
138.94 mm
(5.47 in.)
1.58 mm
(0.06 in.)
9.14 mm
(0.36 in.)
199.39 mm (7.85 in.)
217.68 mm (8.57 in.)
114.30 mm
(4.50 in.)
7.24 mm
(0.29 in.)