Specifications

Cascading Hubs
84
UDM-1604C 4x16 Multi-Format Distribution Hub
CASCADE IN/OUT Connectors
The CASCADE IN and OUT connectors on the UDM-1604C require a UDM-EXP-01 50-Pin Hub
Expansion Cable (FG-UDM-EXP01 - not included). The CASCADE IN and OUT connectors on the
UDM-1604C are intended to be used for cascading audio only.
Cascaded Hub Connection Diagrams
FIG. 109 illustrates a cascaded UDM system with a Master Hub and one target Hub to cascade audio/
video to (up to) 32 display devices (16 outputs per UDM-1604C Hub):
FIG. 108 Cascade In/Out Ports
From another UDM Hub
To another UDM Hub
For all new installations, the recommended method for video distribution uses Solecis
Distribution Amplifiers, rather than the CASCADE IN/OUT Ports (see the Distributing
Video - Using Cascade Kits section on page 79).
FIG. 109 Cascading One UDM-1604C Hub
VIDEO IN
A
VIDEO IN
B
VIDEO IN
C
VIDEO IN
D
UDM-1604C
UDM-1604C
Video Audio
Cascade Cable
Each UDM-1604C distributes video via
UDM-RX01/02/02N Receivers connected
to the RJ45 OUTPUT Ports on the front
panel of the UDM-1604C Hub
UDM-RX01/02/02 Receivers
(up to 16 per UDM-1604C)
Master Hub
Target Hub
Video
SOURCE 2
Audio
16 UDM Receivers
16 UDM Receivers
SOURCE 1
VIDEO IN
A
VIDEO IN
B
VIDEO IN
C
VIDEO IN
D
To 16
display
devices
To 16
display
devices