Specifications

Configuration - Devices Page
56
UDM-1604C 4x16 Multi-Format Distribution Hub
Issuing Commands to Centrally Located Devices
It is also possible to control centrally located hardware such as DVD players, via options in the Devices
page. Remember an IR-TX bud coming from the rear of the UDM-1604C will sit over the Device’s IR
sensor.
1. Select the device(s) you wish to control by clicking on the appropriate Include checkboxes
(FIG. 56).
2. In the Control toolbar at the bottom of the page, select the command(s) to be performed for the
selected device(s) from the 1st and 2nd (Command) drop-down menus (FIG. 55). Two commands
can be issued to a device (1
st
and 2
nd
).
3. Click the Send to included link to issue the commands (see FIG. 57).
FIG. 56 Selected devices
FIG. 57 Optional controls for a device
The first command is limited to Power On, Off and A/V Select.
The Device’s commands must have been learned by the UDM-1604C in order to
function. Refer to the Configuration - Protocols Page section on page 71.