Specifications

Configuration - Devices Page
53
UDM-1604C 4x16 Multi-Format Distribution Hub
Configuration - Devices Page
Overview
The system allows "centrally located" devices connected to the rear of the UDM-1604C (e.g. VCR,
DVD, DVR or Satellite Decoders) to be managed from the user port. Centrally located devices are
connected directly to the rear of the UDM-1604C via the UDM IR ports (Tx1 – Tx4) using an Endeleo
IR Tx bud.
The IR Tx bud will then transmit the IR signal from the UDM-1604C to the device.This is performed
through the Devices page (FIG. 52).
An IR02 Endeleo IR Splitter Cable (FG-IR02) will be needed for each of the IR ports if using 2 devices
per IR port.
 If only one device connected to IR TX port 1/2 it will by default be Device 1.
 If only one device connected to IR TX port 3/4 it will by default be Device 3.
FIG. 52 Devices page
FIG. 53 IR TX ports for locally connected devices
IR TX Ports 1/2
IR TX Ports 3/4