Specifications

Configuration - Inputs Page
51
UDM-1604C 4x16 Multi-Format Distribution Hub
5. Configure the default channels for each TVM input. For example if you enter "1" in the text field for
TVM-AV1 (as shown in FIG. 50), then every time a UDM user selected TVM-AV1 then they would
be initially switched through to TV channel 1.
Channel names are manually entered to help the user recognize each input from the input selection
drop down box on the Status page.
Configuring Audio Types For Inputs
Audio types (Analog L/R or S/PDIF) can be configured for each Input. In the audio section, under the
Type column, select the type of audio (Analog L/R, S/PDIF or none) for each input (FIG. 51).
FIG. 50 Configuring TVM inputs for a UDM-1604C
Default channel on the TVM
when this input is selected
Name each TVM
input here
If through the user selection page you have enabled pass through (i.e. the ability for
the user to send commands through to the TVM hub to change the channel), then
you may find that the text no longer reflects channel being viewed. If this feature is to
be used, try using a generic channel name such as "TVM port X".
FIG. 51 Configuring audio types for inputs
Ensure audio has been connected from the Input to the rear of the hub. Ensure the
connections are sound and fixed correctly.