Specifications

Configuration - Inputs Page

UDM-1604C 4x16 Multi-Format Distribution Hub

 If the Input Type is Composite, additional Name fields are provided to name each of the 3

composite sources separately (as shown in FIG. 48). Name each Composite video source

appropriately.

Configuring TVM (AV) Inputs

TV Inputs from an Endeleo TVM hub can also be fed into the UDM-1604C for display at screens

throughout the location.

Configuring TVM inputs for a UDM Hub

Ensure the port on the TVM is configured to display the correct channel (refer to the TVM

documentation).

2. Ensure the power on the TVM port which will transmit the TV feed has been switched off using the

[k] [port no] command (or using the TVM’s WebConsole).

3. Connect a Cat5 cable from the TVM port on the front panel of the UDM-1604C (FIG. 49) to the

relevant TVM port on the front of the UDM Hub.

4. Name each TVM input accordingly (FIG. 50).

FIG. 48 Inputs page - Naming the Input Type

Name fields for Inputs A-D

Note that since Input B is set to Composite,

there is separate Name field for each

composite input

The power at the relevant TVM port will have to be disabled using the <k> <port no>

command or through the TVM’s WebConsole before being connected to a UDM Hub.

FIG. 49 TVM (AV) inputs

TVM (AV) Inputs