Specifications

Configuration - Setup Page
45
UDM-1604C 4x16 Multi-Format Distribution Hub
Configuration - Setup Page
Overview
Each Hub must be configured for the correct network environment. It is also possible to view device
information, set this UDM-1604C as the Master Hub in a cascaded system, configure the Hub for the
correct date and time and specify Restore options, via options in the Setup page (FIG. 42):
Device Information
The top portion of the Setup page provides several Device Information items as well as Fan control,
SLIP authentication and an option to enable advanced video compensation controls:
FIG. 42 Setup Page
Setup Page - Device Information
Controller firmware: This display-only field indicates the current controller firmware version.
Port: This display-only field indicates the current port (UDM) firmware version.
Input: This display-only field indicates the current input firmware version.
HTML This display-only field indicates the current HTML (WebConsole) version.
Serial number: This display-only field indicates the unique serial number for this UDM Hub.
Internal temp: This display-only field indicates the current internal temperature of the unit.
Fans: These radio buttons allow you to turn off the internal fans. The default setting is "Auto"
(fans will automatically turn on and off based on the internal temperature reading).
Caution: by turning off the fans, the unit may be susceptible to overheating.
Cascade Master: Click to enable Cascading for this UDM-1604C. Refer to the Cascading Hubs section on
page 79 for details.
Authenticate SLIP: By default, SLIP authentication is enabled. De-select this option to disable SLIP authenti-
cation.
Enable advanced
options:
Enable this option to access the advanced video compensation settings (in the Port Con-
figuration options - see the Advanced Video Compensation section on page 30).
Device information
Network Configuration
Date / Time Settings
Restore Options