Specifications

Advanced Administration
101
UDM-1604C 4x16 Multi-Format Distribution Hub
5. Open a Hyperterminal session and connect to the UDM Hub (9600, 8, None,1, None)
6. Type the following command at the prompt:
TFTP -i <ip address of the udm hub> get ixxxx.hub <enter>
Example:
C:\Endeleo\TFTP -i 192.168.1.201 get iudm.hub <enter>
7. After hitting Enter, you should watch the Hyperterminal session window to see the file download
from the UDM Hub.
8. The transfer is now complete.
Endeleo UDM Receiver commands
Several Receiver-specific commands can be used for information purposes.
Viewing Video Compensation Settings
The z command will report the current compensation settings configured within the UDM Receiver.
1. Use Hyperterminal to connect to the Receiver via its serial port.
2. At the command prompt type in setup.
3. Once in setup mode to view the compensation settings, type in z. (FIG. 129)
FIG. 127 GET iudm.hub prompt
FIG. 128 File download from the UDM Hub
FIG. 129 Video Compensation Settings