Specifications

SG-2000 MANUAL 71

The SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA

changes of frequency you may use the UP/DOWN arrow. When these

arrows are used, the frequency will increment in the desired direction (UP

or DOWN) in steps of .1 (100 Hz), .5, 1, 3, and 5 KHz. The size of the step is

set by the Change Frequency Scan Step procedure described on page 69.

Frequency Change - Direct Entry

To change to a new operating frequency via the direct entry method, the

following steps are used:

1) Press “PRGM” to alert the memory that new information is coming.

2) Press “FREQ” to specify that frequency numbers will follow.