Specifications

SG-2000 MANUAL 54
The SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA
©1995, SGC, Inc. TEL: [phone] FAX: [phone]
Scan by FREQUENCY RADIO MUST BE IN FREQUENCY DISPLAY MODE. PRESS
FREQ BEFORE ACCESSING THIS FUNCTION. THEN:
Press SCAN then Up Arrow or Down Arrow
Change Scan Direction While Scanning, press Up Arrow or Down Arrow
Change Frequency Step While scanning by frequency, Press SHIFT/FUNC , FREQ
then Up Arrow or Down Arrow Steps of .1, .5, 1, 3, 5 KHz
may be selected.
CHANNEL SCAN
Scan by CHANNEL Press SCAN ,
CHAN (if dashes displayed, press CHAN again) , then
Up Arrow or Down Arrow
Scan Rate While Scanning Press SHIFT/FUNC , SCAN , Up Arrow or
Down Arrow
(8 bars =Fastest, 1 bar = Slowest)
Scan by Scan Bank(s) Press SCAN (if freq. displayed, press CHAN again) , enter
bank #(s), then SCAN
Define Scan Bank Press PRGM , SCAN enter bank # (0-9), enter channel #
in bank, OPTIONAL - press Up or Down for next scan
bank memory], PRGM
Delete Scan Bank Press PRGM , SCAN enter bank # Up Arrow ,
SHIFT/FUNC 7
DEFINE MEMORY
Define User Channel Simplex Press PRGM , CHAN enter channel #, FREQ enter
RCV frequency, FREQ set parameters, PRGM . (RCV
means "Receive")
Define User Channel Duplex Press PRGM , CHAN enter channel #, FREQ enter
RCV frequency, FREQ set parameters, FREQ enter
TX frequency, PRGM