Specifications

SG-2000 MANUAL 110

The SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA

17.6 RS-232 Software Programming Functions:

Pressing "C" on the Main Menu presents a sub menu which will prompt you to

enter specific information as follows:

Program Sub Menu

[A] SCAN BANK [E] FREQUENCY STEP

[B] TIMER [F] TIME

[C] CHANNEL [G] DATE

[D] SCANNING RATE

A. Scan Banks:

Enter the desired Scan Bank to program.

B. Timer:

The following sub menu is presented to allow you to program the radio to

"wake up" at a preset time and operating in any specified mode.

Program Timer Menu

[A] SET ON & OFF TIME

[B] ON CHANNEL

[C] ON FREQUENCY

1. Press "A" to enter the timer's on and off time.

2. Press "B" to enter the desired timer's on channel.

3. Press "C" to program the on frequency .

Selecting option "C" on the Program Timer Menu presents the following

menu to set the radio's "wake up" frequency and mode:

Enter on Frequency [A] MODE A3H

RX FREQUENCY 0.0 [B] AUDIO FILTER VOC

TX FREQUENCY 0.0 [C] SIDE BAND USB

[D] ATTENUATOR