Installation guide

Programming AMX Controllers for a Kaleidescape System
Page 36
Sample Installation
This section contains a step-by-step implementation of a sample installation that
uses command routing, via TCP/IP over Ethernet. The following figure shows the
layout of the sample installation.
Figure 12: Layout for a sample Installation
Theater The Theater has an NXT-1500VG touch panel with video
capabilities. The theater contains a projector, an adjustable
screen masking system, controlled lighting, and shades. The
M500 Player will be controlled using the OSD Video template.
Family Room The Family Room also has an NXT-1500VG touch panel and
controlled lighting but no masking or shades. The M500 Player
will be controlled using the OSD Video template.
Bedroom and Sunroom The Bedroom and Sunroom each have an NXD-CV5 touch panel
to control music zones 2 and 3 of the Music Player. Each zone
will be controlled with an SATP interface.
Master Bedroom The Master Bedroom uses a universal remote to control the
local M500 Player, so there is no control from AMX.
Kitchen The Kitchen has an NXT-1200VG touch panel, but a video cable
could not be wired to that location, so the M500 Player will be
controlled using the OSD No Video interface.
The Kitchen touch panel will also control music in the Dining
Room using the music zone control feature.