User Guide

Firmware Pages and Descriptions
68
NXP-TPI/4 NetLinx Touch Panel Interface
Protected Setup Navigation Buttons
The Protected Setup Navigation Buttons (FIG. 49) appear on the left of the screen when the Protected
Setup page is currently active.
These Navigation Buttons are specific to the NXP-TPI/4 device and include the device specific elements
described in the following table:
FIG. 49 G4 Protected Setup Navigation Buttons
G4 Protected Setup Navigation Button Elements
G4 Web Control: Press the G4 Web Control button to access the G4 Web Control page where
you can enable or disable display and control of your panel (via the web) by a
PC running a VNC client.
• Refer to the Using G4 Web Control to Interact with a G4 Panel section on
page 42 for more detailed information.
Passwords: Press the Passwords button to access the Passwords Setup page where you
can specify up to five security passwords. Default password is 1988.
• Refer to the Password Setup Page section on page 74 for more detailed
information.
Calibrate: Press the Calibrate button to access the Calibration page where you can use
the displayed set of crosshairs to calibrate a touch screen/panel.
• Refer to the Calibration Page section on page 74 for more detailed
information.
System Connection: Press the System Connection button to access the System Connection page
where you can alter the communication parameters of both the NetLinx
Master and TPI/4.
• Refer to the System Connection Page section on page 75 for more detailed
information.
NXP-TPI/4 Protected
Setup Navigation
Buttons