User Guide

Firmware Pages and Descriptions
59
NXP-TPI/4 NetLinx Touch Panel Interface
Panel Information Page
The Panel Information page (FIG. 42) centers around TPI/4 properties such as: resolution used,
on-board memory, firmware, address/channel information, and string information.
The elements of the Panel Information page are described in the table below:
FIG. 42 Panel Information page (takes its’ information from the TPI/4 device)
Panel Information Page Elements
Back: Returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current
update of the TPI/4’s connection status regardless of what page is currently
active.
• A Lock only appears on the icon if the TPI/4 has established a connection with
a currently secured target Master (requiring a username and password).
Panel Type: Displays the type of G4 device being used.
Firmware Version: Displays the G4 firmware version being used by the G4 device.
• Verify you have the latest version from www.amx.com.
Setup Port: Displays the setup port information/value being used by the TPI/4.
High Port: Displays the high port (port count) value for the TPI/4.
High Address: Displays the high address (address count) value for the TPI/4.
High Channel: Displays the high channel (channel count) value for the TPI/4.
High Level: Displays the high level (level count) value being used by the TPI/4.
Serial Number: Displays the specific serial number value assigned to the TPI/4.
Setup Pages Version: Displays the type and version of the Setup pages being used by the TPI/4.
Screen Width: Displays the pixel width being used to display the incoming video signal on the
G4 device.
• Maximum available screen width on a TPI/4 is 1280 pixels.
Screen Height: Displays the pixel height being used to display the incoming video signal on the
G4 device.
• Maximum available screen height on a TPI/4 is 1024 pixels.
Screen Refresh Rate: Displays the video refresh rate applied to the incoming video signal from the
G4 device.
Screen Rotation: Displays the degree of rotation applied to the on-screen image.
This information is retrieved from
the TPI/4 unit