User Guide

Upgrading TPI/4 Firmware
52
NXP-TPI/4 NetLinx Touch Panel Interface
Step 2: Upgrade the input card firmware via an IP
1.
Click the OnLine Tree tab in the Workspace window to view the devices on the System.
The default System value is one.
2. Right-click the associated System number (from the Workspace) and select Refresh System to
detect of all devices on the current system, establish a new connection to the Master, and refresh the
System list with devices on that system.
3. After the Communication Verification dialog window verifies active communication between the
PC and the Master, verify the TPI/4 appears in the OnLine Tree tab of the Workspace window.
The default TPI/4 panel value is 2275. The TP4 Input Cards will not appear on the system listing.
4. Locate the latest firmware file from the www.amx.com > Tech Center > Downloadable Files >
Firmware Files > NXP-TPI/4 - Input Card Firmware section of the website.
5. Download the appropriate KIT file to your computer.
6. Verify you have downloaded the latest input card firmware (KIT) file to a known location.
7. Select Tools > Firmware Transfers > Send to NetLinx Device from the Main menu to open the
Send to NetLinx Device dialog (FIG. 38). Verify the TPI/4’s System and Device number values
match those values listed within the System folder in the OnLine Tree tab of the Workspace
window.
8. Select the TP4 Input Card’s KIT file from the Files section of the dialog.
9. Enter the Device value associated with the TPI/4 and the System number associated with the Master
(listed in the OnLine Tree tab of the Workspace window). The Port field is greyed-out.
FIG. 37 RGB and Video Adjustment pages (showing the default values)
Incoming signal shown in the background
Firmware version of the TP4-RGB card
Output resolution
Incoming signal shown in the background
Firmware version of the TP4-RGB card
TP4-RGB Adjustment page
TP4-VID Adjustment page