User manual

Advanced Administration

UDM-0404 Endeleo Multi-Format Distribution Hub

Copying IR/Serial Tables

To copy the IR/Serial tables from a UDM-0404:

1. Run your TFTP client. If using the Windows client, move to step 2.

2. Create a folder on the C: drive named Endeleo.

3. Open a command prompt (Start, Run, type "cmd" <enter>) and change it to the C:\Endeleo

directory.

4. Connect the serial cable (RJ12 to DB9) that is supplied with the UDM-0404.

5. Open a Hyperterminal session and connect to the UDM-0404 (9600, 8, None,1, None)

6. Type the following command at the prompt:

TFTP -i <ip address of the UDM-0404> get ixxxx.hub <enter>

Example:

C:\Endeleo\TFTP -i 192.168.1.201 get iudm.hub <enter>

7. After hitting Enter, you should watch the Hyperterminal session window to see the file download

from the UDM-0404.

8. The transfer is now complete.

Windows XP Pro has a built in TFTP client program. If you are using another

operating system, or have an alternate TFTP client, follow the directions of your OS

and install TFTP client if necessary. Consult with AMX Technical Support as to the

appropriate client for your OS.

FIG. 104 GET iudm.hub prompt

FIG. 105 File download from the UDM-0404