User manual

Compliances

NXA-ENET24 Hardware Installation Guide

Compliances

FCC - Class A

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause interference to radio communications. It has been

tested and found to comply with the limits for a Class A computing device pursuant to Subpart B of Part

15 of FCC Rules, which are designed to provide reasonable protection against such interference when

operated in a commercial environment. Operation of this equipment in a residential area is likely to

cause interference, in which case the user, at his own expense, will be required to take whatever

measures may be required to correct the interference. You are cautioned that changes or modifications

not expressly approved by the party responsible for compliance could void your authority to operate the

equipment.

You may use unshielded twisted-pair (UTP) for RJ-45 connections - Category 3 or greater for 10 Mbps

connections, and Category 5 for 100 Mbps connections, and Category 5 or 5e for 1000 Mbps

connections. For fiber optic connections, you may use 50/125 or 62.5/125 micron multimode fiber or 9/

125 micron single-mode fiber.

Industry Canada - Class A

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus

as set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the

Department of Communications.

Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils

numériques de Classe A prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques,”

NMB-003 édictée par le ministère des Communications.

Japan VCCI Class A

Wear an anti-static wrist strap or take other suitable measures to prevent electrostatic

discharge when handling this equipment.

When connecting this switch to a power outlet, connect the field ground lead on the

tri-pole power plug to a valid earth ground line to prevent electrical hazards.